Meter reader – PULSE sensor
The PULSE sensor is a versatile reader of water, gas and electricity meter for construction sites.
It allows you to remotely monitor your water, gas and energy consumption in real time from a single dashboard.
The meter can be adapted to your specifications thanks to its data transmission period and configurable thresholds.
You can then be alerted by email and/or SMS in the event of a leak or excessive consumption.
technical features
Data type: m³, kWh
Data display: Cumulative curve, real-time graph from the UBY platform
Network: LoRaWAN Class A
Power supply: Battery, 500 pulses/day
Battery life: 2 years
Equivalent input pull-up: 180 kΩ
(water), 47 kΩ (gas)
Measurement frequency: Periodic (configurable from 5 minutes to 24 hours), cumulative
Input frequencies: < 100 Hz
Operating range: -25°C to + 70°C, 0 to 85% RH (non-condensing)
Weight: 108 g
Dimensions (mm): 132 x 62 x 34
Power supply: Battery, 500 pulses/day
Waterproof rating: IP68
Mounting method and conditions: Sensor mounted on water/electricity meter and/or relevant pipe.
Mounting: Cable tie or adhesive, no screws required.
Technical requirements and installation
Required equipment: LoRa network coverage. If there is no coverage, a mains socket for a LoRa Gateway (set up of a private LoRa network).
Maintenance: Model and photo(s) of the meter to be sent in advance to UBY support. Remote supervision by our teams. Return the sensor to support for recycling when the battery is depleted.
Measurement graph – Water consumption
FAQ
Does the sensor comply with the GDPR
The sensor, its software and algorithms are fully compliant with the GDPR.
The SD card is full, what should I do?
The sensor, its software and algorithms are fully compliant with the GDPR.